Peplink PoE Switches for Your Business Network
Cloud-Managed PoE Switches for Offices, Warehouses, and Multi-Site Businesses
TTI supplies, installs, and configures Peplink's cloud-managed PoE switches for offices, warehouses, and multi-site businesses across New Jersey, Pennsylvania, and New York. Peplink's current series runs from an 8-port 10G switch to a 48-port 2.5G switch, with PoE budgets up to 740W to power access points, cameras, and phones over the same cable that carries their data.
Comparing brands? Read our Peplink vs. Grandstream switches comparison.
Looking for the Peplink SD Switch? Peplink's PoE Switch series is the successor to its earlier SD Switch line, and it keeps cloud management through InControl 2. If you already run SD Switches and want to talk about your options, call TTI.
| Model | Ports | PoE budget |
|---|---|---|
| 8 PoE 10G Switch | 8x 10G PoE++ RJ45 + 4x 10G SFP+ | 720W |
| 24 PoE 2.5G Switch | 16x Gigabit + 8x 2.5G PoE+ RJ45 + 4x 10G SFP+ | 410W |
| 24 PoE 2.5G Switch Rugged | 16x Gigabit + 8x 2.5G PoE+ RJ45 + 4x 10G SFP+; fanless | 250W (300W external power supply) |
| 48 PoE 2.5G Switch | 32x Gigabit + 16x 2.5G PoE+ RJ45 + 4x 10G SFP+ | 740W |
Which Switch Fits Your Network
- 8 PoE 10G Switch: A compact switch for sites that need high-power PoE++ devices or 10G connections to a few key systems.
- 24 PoE 2.5G Switch: A good fit for an office with several Wi-Fi access points, IP phones, and cameras. The 2.5G ports match the uplinks on many newer access points.
- 24 PoE 2.5G Switch Rugged: Built for warehouses, outdoor cabinets, and industrial sites. It's fanless and rated from -40°F to 149°F, with DC power inputs for harsh locations.
- 48 PoE 2.5G Switch: For larger offices and campuses with many access points, phones, and cameras on one switch.
The right model depends on how many wired devices you have and how much power each one needs. Add up the PoE draw of every access point, phone, and camera from their spec sheets, then pick a switch with room to grow. TTI can do this sizing for you.
Features and Management
- Cloud management: Peplink's InControl 2 platform is used to configure and monitor the switch, with port control, VLANs, traffic monitoring, and individual port power reporting.
- Network features: Link aggregation (LACP), spanning tree, inter-VLAN routing, DHCP snooping, and loop protection.
- Warranty and support: A one-year limited warranty from Peplink, with PrimeCare subscriptions available for each model.
Peplink notes that these switches are currently configured through InControl. Specifications are subject to change, so contact TTI to confirm the current details for the model you need.
Frequently Asked Questions
Do these switches provide PoE?
Yes. Every current model supplies PoE+, and the 8-port model adds PoE++ (802.3bt) for higher-power devices. Total budgets range from 250W to 740W depending on the model.
How are they managed?
Through Peplink's InControl 2 cloud platform. TTI can set up your account and configure the switches for you.
Which switch is built for harsh environments?
The 24 PoE 2.5G Switch Rugged. It has a fanless design and is rated from -40°F to 149°F.